| |
Repsol Ibercut 20C
Translation of the original Spanish. In case of a discrepancy, the Spanish original prevails
Description and Recommendations
A pure, very liquid oil formulated with natural paraffin refined base oils and specially selected additives that provides the characteristics required for the general machining of steel and alloys.
Ibercut 20-C is suitable for machining work when good cooling is required whilst maintaining a
good finish. It is a good idea to clean the tanks well before using the new product.
Properties
ts transparency and clear colour allow the machining work to be seen. Its excellent oiliness and good cooling prolong tool life and gives a good finish to pieces. Its high ignition point reduces smo and the risk of fire.Does not stain aluminium or copper parts.
Quality level
ISO 6743/7 category ISO-L-MHE
Technical characteristics
|
UNITS |
METHOD |
VALUE |
Appearance |
|
|
Light reddish yellow |
Colour |
g/ml |
ASM D 1500 |
<1,5 |
Density at 15oC |
cSt |
ASTM D 4052 |
0,870 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
24 |
Viscosity at 100oC |
- |
ASTM D 445 |
4,4 |
Viscosity rate |
mg KOH/g |
ASTM D 2270 |
100 |
Saponification rate |
oC |
ASTM D 94 |
12 |
Pour point |
oC |
ASTM D 97 |
-15 |
Flammability V/A |
|
ASTM D 92 |
200 |
Copper corrosion |
|
ASTM D 130 |
1a |
Four ball machine test |
kg |
|
|
- Soldering load |
|
IP239 |
250 |
Rust A |
|
ASTM D 665 |
400 |
Rust B |
|
ASTM D 66 |
43,2 |
Overview
Bulk, 830kg containers and 185kg cans.
Hazard identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of
gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: As this product has low volatility, the risk of inhalation is minimal. Ingestion: Do not make an affected person vomit. Supply water. Get medical help. Contact with the skin: Was thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
No special measures required.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
Danger of physical pollution if spilt (water, coastlines, soil, etc.) due to its floatability and oily consistency that may harm flora and fauna on contact. Prevent the material from entering the water supply. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid dispersion using mechanical barriers and remove with physical or chemical elements.
|
|
